2009/10/18

From HypertWiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Sunday, October 18, 2009 (#291)
Saturday Sunday Monday
Exact day: category (1) This month: category (14) / page
Other years: category (4) This year: category (130) / page

[category:Facebook]]

Facebook

08:39

Came down this morning to find that Josh had left the fridge door wide open. Closed it. Ten minutes later, I found it open again -- even though I was cooking stuff for him. We've looked into fridge alarms (either light- or temperature-based*), but they're all ridiculously expensive for a circuit which I could make myself for $2, if I had the time to figure it out.

*I should have said light, temperature, or (what would be simplest) mechanical -- just a leaf switch or something.

The minor problem is that it shouldn't go off right away; there should be a delay of maybe 10-30 seconds, so people can get into the fridge for normal stuff without being beeped at constantly. Just rigging a switch to a beeper I could probably do in a few minutes; it's the timer that's the tricky part.

  • Mel suggests a fridge lock

Can you get one for an existing fridge? I thought those had to come with the unit.

  • Mollie suggests Gorilla Glue (which ends up not working for this problem, but does end up working quite well for replacing sewer clean-outs)

I've heard rumors of the manifold virtues of Gorilla Glue -- we may actually try that. Then we add yet another key to the kids' keyrings (and ours). Meh.

  • Hilde suggests some kind of self-closing mechanism

I thought of that... there are 2 options I can see: (1) spring-loaded hinge to push the door closed, (2) a spring without a hinge, pushing the door closed from the same location.

The problem with #1 is that the axis of the new hinge needs to be in line with the axis of the door's existing hinges, and that axis is inside the door. #2 might work, but the problem is getting it to stay attached (not as much surface area for the glue). Maybe if someone made a push-spring with plates on both ends (or if there were some way to attach plates firmly to the spring), which could then be glued... I'll have a look next time we're at the hardware store, but I kind of doubt it.

A cheap but ugly solution: attach a string just above the door and dangling down the front of the door, with a weight at the end. This will tend to pull the door closed. I might try that.